Low Intensity Red Obstruction Light
- Elevated vertical beam angle to minimize light below the horizontal plane.
- Built with high efficient light emitting diodes. Extermely long lifetime.
- Heavy duty housing. Nylon base and cupola of polycarbonate, UV resistant.
- Integrated bird spike
- Lightning protection with internal copper lining in base and surge arresteres.
- Internal monitoring and alarm functions.
- Operating voltage noninal 24V DC (20-30V)
- Pre wired with 15m shielded robust cable.
BT2010 Medium Intensity Red LED Light
Omnidirectional super high bright LED light - 2000 candelas
Steady burn or flashing
- High bright LED’s.
- Polycarbonate dome and aluminium top cover with bird spike.
- Heavy duty stainless steel base.
- 3 degree vertical divergence.
- Highly reduced intensity below horizontal.
- Extremely long life of LED element and low power consumption.
- Comply to ICAO Annex 14, medium intensity type B and C and FAA L-864.
- Optional elevated beam angle for offshore
Can operate stand alone as steady burn. Operates on 24V DC or 115/230V AC. External controller features programmable flash rate, external synchronization, adjustable light output for multiple intensity systems, photocell for day/night control, monitoring.
BT3000 Medium Intensity LED Light
- Certified to ICAO Annex 14 and W-Red
Solid state LED technology and state of the art optics
2000cd white flashing light day and 170 or 2000cd red flashing or steady burn light night
The BT3000 beacon is designed to replace medium intensity xenon strobe units. Meets fully ICAO and W-Red requirements.
Can be operated as:
Type A
20000cd white light day and
2000cd white light night.
Type A/B
20000cd white light day and
2000cd red flashing light night.
Type A/C
20000cd white light day and
2000cd red steady burn light night.
Type A/W-Red
20000cd white light day and
170cd red flashing light night.
Use of solid state LED technology extents the lifetime for the light source several times compared to xenon flash tubes, halogen or incandescent lamps. Thereby reduced maintenance costs.
Very narrow and well defined vertical beam, leading to very low intensity below the horizontal plane.
Microprocessor controlled driver and advanced temperature management system maintains the LED’s well within their operating condition to maintain the correct intensity.
BT3000 operates with BC3001 LED Beacon Controller
- BC3001 LED Beacon Controller
- Power supply and constant current sources for LED’s
- Flash character generator with programable flash rate and duty cycle
- Photocell detector for day/night switching
- Programmable three step intensity
- GPS receiver for wireless synchronization
- Small compact size, built in powder coated aluminium housing
- Can be configured for single or dual beacon - white only - or combined white / red
BT700 Helicopter Beacon
BT700 Helicopter Beacon is designed especially for installation on offshore wind turbines to guide the pilot to a specific wind turbine within a large group of turbinbes.
BT700 Helicopter Beacon is a green light built with high bright and high preformance Light Emitting Diodes (LED’s).
Technical data:
Colour: Green - 550nm
Intensity: 100cd +40%
Operating voltage: 20-30V DC
Power consumption: 30W
Horizontal angle: 360o
Vertical angle: 180o
Protection: IP55
Mechanical dimensions: 183 x 220mm
Weight: 5 kg
LA70 LED Light Armature
- Maintenance free
- Built with Light Emitting Diodes
– Extremely long life time
– In excess of 60.000 hours - Low power consumption
- Operates on 19-29V DC
- Reduced light output for emergency mode (battery back-up)
- Heavy duty housing
– Extruded Aluminum profile (Seawater resistant)
The LA series is a high quality LED light armature that comes in different versions, with a variety of light output. It combines low power consumption, high light output and maintenance free features into a cost effective high quality product.
Technical data
Illuminance: 750 Lux @ 1 meter.
Power: 24W / 24V DC
Color: Neutral White (optional: cool, warm)
Window: Clear acrylic glass (optional: frosted for defused light)
Mechanical: Extruded Aluminum Profile (Seawater Resistant)
IP Class: IP67
Dimensions: L: 720 x W: 156 x H: 82mm (optional: diff. length)
Weight: 4,5 Kg